Multi-Room Amplifier |
Audio Specifications |
Channel |
8 channel (2 channel x 4) |
Minimum Speaker load Capability |
4 ohm |
BTL Connection |
Yes |
Speaker Output Terminal |
4 (Euroblock) |
Audio Input Terminal |
RCA: 4 |
Audio Output Terminal |
RCA (2-ch through out): 4 |
Trigger In / Out |
4 / 4 |
Remote In / Out |
1 / 1 |
Rated Output Power (1 kHz, 0.9% THD, 2ch driven) |
Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W |
Rated Output Power (1 kHz, 0.9% THD, 1ch driven) |
Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W |
Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst) |
Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W |
Dynamic Power (1 kHz, 0.9% THD, 2ch driven, 20 ms burst) |
Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W |
Dynamic Power (1 kHz, 0.9% THD, All ch driven, 20 ms burst) |
Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W |
Maximum Effective Output Power |
[1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W |
Total Harmonic Distortion |
[SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04% |
Frequency Response |
[1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz |
Signal to Noise Ratio |
[SP OUT AUX IN] 108 dB |
Maximum Input Signal |
[PRE OUT L / R, 0.9% THD] 1 V |
Gain |
[SP OUT 1 V Input] 25.8 dB |
Input Sensitivity |
[1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V |
General |
Power Consumption |
130 W, [All Zone On] No Signal Condition: 32 W, [All Zone Off] Audio Sense On: 14.8 W |
Standby Power Consumption |
Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W |
Power Management (Auto Power Standby) |
Yes (On / Off) |
Dimension (W × H × D) mm |
[Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm; 17-1/4” x 1-3/4” x 17-3/8”, [Table Top Mount with Adhesive Feet and Faceplate] 437 x 46 x 453 mm; 17-1/4” x 1-3/4” x 17-7/8”, [Rack Mount] 481 x 44 x 443 mm; 18-7/8” x 1-3/4” x 17-3/8”, [Rack Mount with Faceplate] 481 x 44 x 453 mm; 18-7/8” x 1-3/4” x 17-7/8” |
Weight |
6.0 kg; 13.2 lbs. |